Raven Cruizer II Manuel de l'opérateur télécharger pdf (Page 65)

Manual No. 016-0171-093 59

SmartBoom/SmartRow Configuration Screens

Console Port Screen (SmartBoom Only)

To get to the Console Port screen, press from the Port D Baud Rate screen.

The Console Port screen allows you to change or disable the port that communicates with a Raven

console.

Press to change the Console Port setting. The setting will begin blinking to indicate you are in edit

mode. Use the or key to toggle between ports ‘A’ through ‘D’ and “NONE.” Press the

key again to finish editing. Port ‘C’ is the default. If the SmartBoom/SmartRow controller is not

connected to the serial port on a Raven console, this setting must be set to “NONE” for the system to

operate properly.

Console Port

RAVEN

HOME

INDUSTRIES

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 97 98

Pas de commentaire

Raven Cruizer II Manuel de l'opérateur Page 65