Raven Cruizer II Manuel de l'opérateur télécharger pdf (Page 24)

Chapter 5

18 SmartBoom and SmartRow Installation and Operation Manual

Field Boundary Offset Screen

To get to the Fld Bndry Offset screen, press from the Create Fld Bndry screen.

The Fld Bndry Offset screen displays the orientation of the field boundary with respect to the booms. If

“Left” is selected, the field boundary will be created at the end of the left boom. If “Right” is selected,

the field boundary will be created at the end of the right boom. If “Center” is selected, the boundary will

be created at the center of the booms.

Press to edit the offset. The menu will begin blinking. Use the or key to toggle between

selections. Press to apply your selection.

Start Field Boundary Screen

To get to the Start Fld Bndry screen press from the Fld Bndry Offset screen.

The lower left corner of the Start Fld Bndry screen shows the orientation of the field boundary with

respect to the spray booms. “FBL” indicates the end of the left boom will be used. “FBR” indicates the

Fld Bndry Offset

Left

RAVEN

HOME

INDUSTRIES

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 97 98

Pas de commentaire

Raven Cruizer II Manuel de l'opérateur Page 24